Let’s try out your new IC recorder
1. Power on.
Utilizing Your Computer
Additional features
GB
ES
Details of these additional features for recording, playback, and editing are included in the help guide.
ˎ Scene Selection
ˎ Noise Cut
ˎ T‑MARK (Track mark)
ˎ DPC (Digital Pitch Control)
ˎ A‑B Repeat
ˎ VOR (Voice Operated Recording)
ˎ Alarm
ˎ Easy Search
Installing the help guide on your computer
By installing the help guide on your computer from the built‑in memory of the IC recorder, you can
Slide and lift the battery compartment lid, then insert
ˎ Divide
IC Recorder
batteries with the correct polarity.
search for detailed operations and possible solutions when a problem occurs.
ˎ Sound Organizer editing software
Quick Start Guide
Turn the power on.
Connect the
(USB) connector of the IC recorder with the USB port of your running
computer with the supplied USB connecting cable inserted into the connectors securely
until each plug stops to the end.
Slide and hold the HOLD•POWER ON/OFF switch in the
direction of “POWER ON/OFF” for more than 1 second.
In Windows: Click [Computer] (or [My Computer]), then double-click [IC RECORDER]
[FOR WINDOWS].
Precautions
On power
ˎ Should any solid object or liquid fall into the IC
recorder, remove the battery and have the IC
recorder checked by qualified personnel before
operating it any further.
In Mac: Double-click [IC RECORDER] on the desktop.
Operate the IC recorder on 3.0 V or 2.4 V.
Use two LR03 (size AAA) alkaline batteries or NH‑AAA
rechargeable batteries.
To turn the power off, slide and hold the HOLD•POWER ON/OFF
switch in the direction of “POWER ON/OFF” until “Power Off” is
displayed.
Install the help guide.
In Windows: Double‑click [Help_Guide_Installer] (or [Help_Guide_Installer.exe]).
In Mac: Double‑click [Help_Guide_Installer_for_mac.app]. (v10.5.8 or higher)
Follow the instructions that appear on the screen to proceed with installation.
On safety
If you have any questions or problems concerning
your IC recorder, please consult your nearest Sony
dealer.
Do not operate the IC recorder while driving, cycling
or operating any motorized vehicle.
To prevent unintentional operations (HOLD)
After the installation completes, double-click the [Help_Guide_icdp33_uc.htm] (for
the customers in the U.S.A. and the Latin American countries] or [Help_Guide_icdp33_
On handling
zz.htm] (for customers in other countries) icon in the desktop for Windows (or in Finder
ˎ Do not leave the IC recorder in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or mechanical shock.
for Mac).
The help guide is displayed.
You can also view the help guide on the following Sony IC Recorder customer support home
page:
¼ To release the IC recorder from the HOLD status, slide the
HOLD•POWER ON/OFF switch towards the center.
ICD-PX333/PX333F
uc/
Owner’s Record
2. Set the date and time.
The model number is located at the rear panel and the serial number is located inside the battery compartment.
Record these numbers in the space provided below. Refer to these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. ________________________________
Serial No. _________________________________
When you insert a battery for the first time, or after the IC
recorder has been without a battery for more than 1 minute, “Set
Date&Time” appears, and then the clock setting window appears.
4-441-194-51(1)
Copying files from the IC recorder to your
computer
© 2013 Sony Corporation Printed in China
Press – or + to set the year (the last two digits of
the year), and then press PLAY/STOP•ENTER. Repeat
this procedure to set month, day, hour, and minute in
sequence.
WARNING
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a
long time.
You can copy the files and folders from the IC recorder to your computer to store them.
Welcome to your new Sony IC recorder!
Connect the IC recorder to your computer.
This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder.
Please read it carefully. We hope you enjoy using your new Sony IC recorder.
When you set the minute and press PLAY/STOP•ENTER,
the clock reflects the setting.
CAUTION
Copy files or folders you want to transfer to your computer.
Drag and drop the files or folders you want to copy from “IC RECORDER” or “MEMORY CARD” to
the local disk on your computer.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Note
The time is displayed either in 12‑Hour with “AM”or “PM,”or in
24‑Hour,depending on the “Time Display”setting in the menu. The
default setting differs depending on the country or region you
purchased the IC recorder.
Capacity (User available capacity*1*2)
4 GB (approx. 3.60 GB = 3,865,470,566 Byte)
Check the supplied items.
To copy a file or folder (Drag and drop)
ˎ IC Recorder (1)
ˎ Application Software, Dragon
NaturallySpeaking (DVD‑ROM)
(1)*
ˎ Help Guide (HTML file stored
in the built‑in memory so it
can easily be copied to your
computer.)
* supplied with some models in
some regions.
1
*
*
A small amount of the built‑in memory is used for file management and therefore not available for user storage.
When the built‑in memory is formatted with the IC recorder.
ˎ Stereo headphones (1)*
ˎ USB connecting cable (1)
ˎ Stereo Microphone with
Shirt‑Clip (1)*
2
Click and hold,
drag,
and then drop.
ˎ Quick Start Guide (1)
Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*3
Approx. 37.5 mm × 114.0 mm × 20.9 mm
ˎ Application Software, Sound
Organizer (Installer file stored in
the built‑in memory so that you
can install it to your computer.)
3. Select the menu language.
ˎ Carrying pouch (1)*
ˎ LR03 (size AAA) alkaline
batteries (2)
Mass (JEITA)*3
Approx. 74 g including two LR03 alkaline batteries
Press DISP/MENU.
Press – or + to select “Detail Menu”, and then
IC RECORDER or Your computer
MEMORY CARD
3
*
Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association)
press PLAY/STOP•ENTER.
Optional accessories
ˎ Electret condenser microphone
ECM‑CS10, ECM‑CZ10,
ECM‑DS70P, ECM‑DS30P,
ECM‑CS3, ECM‑TL3
Press – or + to select “Language,” and then press
Disconnect the IC recorder from your computer.
PLAY/STOP•ENTER.
ˎ Rechargeable battery
ˎ Compact charger &
The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions
may not comply with FCC technical regulations.
NH‑AAA‑B2EN, NH‑AAA‑B2KN
ˎ USB AC adaptor AC‑UD20,
AC‑U501AD, AC‑U50AG
2‑pc AAA Multi‑Use Premium
batteries BCG‑34HS2KAN,
BCG‑34HW2KAN
Press – or + to select the language that you want
to use in the display window, and then press PLAY/
STOP•ENTER.
INFORMATION
Installing Sound Organizer
Install Sound Organizer on your computer.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Note
You can select the following languages:
Deutsch (German), English, Español (Spanish), Français
Depending on the country or region, some of the models or optional accessories are not available.
Note
(French), Italiano (Italian), Русский (Russian),
(Korean),
Sound Organizer is compatible with the Windows PC only. It is not compatible with Mac.
(Chinese), (Chinese), (Thai)
¼ Number of language options you can select and the default setting
differ depending on the country or region you purchased your IC
recorder.
¼ When installing Sound Organizer, log in to an account with administrator privileges.
Parts and controls
Connect the
(USB) connector of the IC recorder with the USB port of your running
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
computer with the supplied USB connecting cable inserted into the connectors securely
until each plug stops to the end.
Press (stop) to return to the stop mode display.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to
operate this equipment.
4. Record.
¼ Before you start using the IC recorder, make sure that you slide the
HOLD•POWER ON/OFF switch towards the center to release the
HOLD status.
If you have any questions about this product, you may call: Sony Customer Information Service Center 1‑800‑222‑7669
Press REC/PAUSE.
Declaration of Conformity
Recording starts and the operation indicator (‑A) flashes in
orange, and then lights in red.
Trade Name
Model
: SONY
: ICD‑PX333
¼ You can pause recording by pressing REC/PAUSE. Press REC/
PAUSE again to restart recording.
Responsible Party : Sony Electronics Inc.
Address
: 16530 Via Esprillo, San Diego, CA 92127 USA
Telephone Number : 858‑942‑2230
Place the IC recorder so that the built-in microphone face
Make sure the IC recorder has been recognized properly.
While the IC recorder is connected to the computer, “Connecting” is displayed in the display
window of the IC recorder.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
the direction of the source to be recorded.
Press (stop) to stop recording.
The “Accessing...” animation appears and the recording stops.
Go to the [Start] menu, click [Computer] (or [My Computer]), and then double-click [IC
RECORDER] [FOR WINDOWS].
Double-click [SoundOrganizerInstaller_V140] (or [SoundOrganizerInstaller_V140.exe]).
5. Listen.
6. Erase.
Follow the instructions that appear on the screen.
Built‑in microphone
(microphone) jack*
Display window
(USB) connector
Press PLAY/STOP•ENTER.
Playback starts and the operation indicator (‑A) lights in
green.
Make sure that you accept the terms of the license agreement, select [I accept the terms
M2™/microSD memory card slot
HOLD•POWER ON/OFF switch
Battery compartment
in the license agreement], and then click [Next].
DISP/MENU button
SCENE button
When the [Setup Type] window appears, select [Standard] or [Custom], and then click
[Next].
Adjust the volume by pressing VOL –/+.
Strap hole (A strap is not supplied.)
Follow the instructions on the screen and set the installation settings when you select [Custom].
(folder) button
Press (stop) to stop playback.
PLAY/STOP•ENTER* button
When the [Ready to Install the Program] window appears, click [Install].
(stop) button
The installation starts.
– (review/fast backward), + (cue/fast
When the [Sound Organizer has been installed successfully.] window appears, check
forward) buttons
[Launch Sound Organizer Now], and then click [Finish].
Speaker
Note
(headphones) jack
Operation indicator
ERASE button
You may need to restart your computer after installing Sound Organizer.
Note
Once a file is erased, you cannot restore it.
If you format the built‑in memory, all data stored there will be erased. (The Help Guide and the Sound Organizer
software will also be erased.)
VOL –/+ (volume –/+) button*
Press ERASE.
A‑B (repeat A‑B) button
“Erase?” is displayed and the file to be erased is played back
for confirmation.
REC/PAUSE (record/pause) button
NOISE CUT switch
Select “YES” using – or +, and then press
PLAY/STOP•ENTER.
T‑MARK (track mark) button
* These buttons and the jack have a tactile dot. Use it as a reference point for operations, or to identify each terminal.
The “Erasing...” animation appears and the selected file is
erased.
|
Sharp Fax Machine Version 25 User Manual
Shure Headphones P3RA User Manual
Sierra Monitor Corporation Carbon Monoxide Alarm 2 Wire Series User Manual
Sony Car Stereo System NWZ E453 User Manual
Sony Dust Collector BZNP 100 User Manual
Sony Speaker XS V6950H User Manual
Sunbeam Food Processor LC7900 User Manual
Symphonic TV DVD Combo LCD TV DVD User Manual
Tanaka Edger TBC 2501 User Manual
TANDBERG Webcam 550MXP User Manual